What is integrated ultrasonic detector parking guidance sensor

The detector is an important part of the parking space guidance system. It integrates the ultrasonic probe with the indicator light and is installed in front of each parking line. The indicator light is displayed at the same time, and the parking space information is transferred to the regional controller through the 485 network at the same time.

A  integrated ultrasonic detector parking guidance sensor is composed of the main body of the detector and the indicator light. The main body of the detector is an ultrasonic probe to detect the empty state of the parking space; the integrated integrated indicator light shows differently color. When there is no vehicle mooring on the parking space, the indicator light is green, the indicator light is red when the vehicle is moored, the fixed parking site indicator shows blue, and the reservation parking indicator shows purple.

L parking space detector and indicator light integration are integrated, installed above the front of each parking space. Compared with the traditional split ultrasonic parking space guidance system, the construction is easier to effectively reduce the construction cycle. At the same time The indicator light, a KBG tube or a bridge, a single pass, a twisted line, etc., which greatly reduces the cost of each parking space and labor cost;

l Install it on the bridge in front of each parking space to effectively avoid column cover, and the installation effect is more neat and beautiful;

L adopts two independent receiving and receiving ultrasonic circuit design to effectively cover the detection area. At the same time, work independently, dual -road switching, redundant backup, greatly improve the life of the detector and stable reliability;

l The receiving circuit adopts a variety of combined judgment methods to enhance the anti -interference and detection stability of the equipment;

l uses advanced intelligent learning anti -interference algorithms, which effectively solves the lane skewers of ultrasonic waves in the detection process, disturbing by car car, and the stability and reliability of the detection of parking space;

l The overall tested by strict electrostatic, lightning strikes, surge, and group pulse effectively ensure the reliable use under the influence of severe environmental factors such as Japanese light lamps, large electromechanical equipment, lightning strikes and surge in the parking lot;

l uses short -circuit, anti -connection, and error -connected protection design to prevent electrical damage to related equipment due to short -circuit, anti -connection, and error connection caused by wiring errors during construction;

The l connection is connected with plug -in terminals. When connecting, you only need to use a light plug -in to complete the device connection, which greatly reduces the artificial cost of traditional wiring, and reduces the short circuit and poor contact caused by the poor wiring. Connect to another inquiry)

l The external dual LED status indicator, just observe the ground to understand the work status of the device, and know the abnormal situation at a glance;

l Internal status indication is designed with LED lamp beads, long service life, long visual distance;

l Unique appearance design, simple atmosphere;

l Support the passive switch input detection, the switch volume output, you can detect the parking space lock and other external equipment signals (upgraded version);

l Support booking function. (Upgraded version).

Set up the remote control as a replacement of a generation dial switch, and the remote control set the probe distance. The traditional dial switch needs to debug the probe on the upper and lower ladders when debugging. The remote control remote settings only need to hold the remote control settings under the probe.

Instructions:

The parameters displayed on the screen are::

1. Address: Set the address code

2. Detecting distance, you can set 0-6m

3. Equipment type, can be set to probe (DTT), screen (screen), and wireless lamp (Light) (not used) factory test mode (FARTY)

4. Work mode, offline (off) or online mode (on). In the online mode, if there is no RS485 connection in a second, the LED will flash. The offline mode does not flash

5. Display type, normal mode (red and green display), whether it is VIP (red blue display), appointment mode (red and yellow display)

There are 9 keys below, the function is shown in the figure above. The upper, lower, left, and right are used to choose what parameters are selected. The current set value will have a cursor flickering. Add and reduce the parameter values. Reading keys can read the current information of the device. After setting the parameters on the screen, the point settings key can set the corresponding parameter of the device.

Instructions
1. After power -on, the screen is initialized at about 1 second, and the screen displays the above data.
2. Press the reading key to read the current device value (this step can skip)
3. Use the parameters to be modified up, down, left, and right, and modify it to the required values.
4. After modifying, press the settings to complete the modification. If the device receives the modification information and the modification is successful, there will be a blue flash.