What is anti-smashing technologies of boom gate for parking system

The parking lot barrier is a parking lot equipment used to control the entry and exit of vehicles. When the vehicle is released, the railing is raised, and the vehicle falls through the rear railing. Due to technical or management reasons, the situation of smashing cars or people at the gate often occurs, causing damage to vehicles, injuries to people, and entanglement of responsibilities, which makes people more concerned about the safety of the parking lot gate system. more and more attention. Ensuring safety is the basic principle of designing a parking lot system, and we have rich experience in preventing smashing of road gates. So what are the anti-smashing technologies commonly used in parking lot systems? Let us introduce to you below.

1. Ground sense anti-smashing technology
Generally, the parking lot is equipped with ground sense. When the vehicle detector detects the ground sense trigger signal, it will control the brake lever to keep rising and maintain a vertical state, and only drop the lever when the ground sense signal disappears. The key to this anti-smashing technology is the stability of the ground-sensing coil. If the ground is disturbed, it may fail. Moreover, the ground-sensing can only detect vehicles and does not have the function of preventing people from being hit.
2. Infrared anti-smashing
This method is to install infrared radiation devices on both sides of the entrance and exit gates. During the fall of the gate, if a vehicle enters and the infrared rays are blocked, the gate will automatically rise, and the response is relatively fast. However, the infrared radiation range is small, and it is easily disturbed by rain and snow weather. ,
3. Pressure wave anti-smashing
It is also called anti-smashing in case of resistance. It is mainly to install a return device in case of resistance. When the brake lever comes into contact with vehicles or pedestrians during the falling process (the contact force can be adjusted), the rubber strip under the barrier lever of the device is resisted, and the intelligent return to the road is blocked. The device immediately converts the state of dropping the pole into the state of raising the pole, and the barrier is raised to prevent smashing cars and people.
4. Digital anti-smashing
This technology is relatively safe, but of course the cost is relatively high. The digital automatic detection and anti-smashing vehicle detection technology does not require other auxiliary protection devices, and accurately collects the operating data of the brake lever in real time to monitor the operation. Once the operation is blocked, the brake lever will quickly rising.
Well, the above are several anti-smashing technologies often used in smart parking lots, I hope to help you.